Combat
From Conflict of Nations Wiki
Contents
- 1 Combat at a Glance
- 2 The Tools of War
- 3 Acts of War
- 4 Changes to Population Morale
- 5 Combat Mechanics
Combat at a Glance
Combat aims to establish total dominance over an opposing force. To succeed, you must hone your tactical awareness. As commander of an entire nation, you need a deep understanding of the intricate details of modern war. Study the mechanics of close-combat attack and defense, as well as how combat might play out in different scenarios. Victory goes to the prepared.
- Diligence - Anticipate diplomatic interference and counter attacks, as well as growing insurgent areas.
- Effective strategy - Think ahead and don't waste resources. Every decision counts, especially when you are investing realtime.
- Resources - Keep an eye on your resource production. Consider provinces and cities that you require for further Arms Industries construction. If new territory is hard to acquire on your own, ally with someone.
- Diplomacy - Diplomatic relations will make or break the game and must not be undervalued.
The Tools of War
Army Stacking Penalties
To simulate modern logistics and fire-and-maneuver doctrines, you will notice a strict stacking penalty for units. Expect to see diminishing returns, and even negative modifiers, in combat strength, movement speed, and defensive capabilities.
If marked yellow, the unit stack suffers from diminishing returns, i.e. every additional unit added to the stack makes it less effective. Once the indicator turns red your stack begins to suffer.
Attrition
Attrition slowly bleeds your unit's HP when they cross certain terrain. It is not severe enough to kill your units, but the Russian winters or the Saharan desert will definitely affect your troops. Beware of Mountains, Jungles, Arctic, and Desert terrain.
Missile Warfare
Modern battlefields are extremely hostile due to the very high amount of damage concentrated in very small delivery systems, such as Cruise Missiles.
Conflict of Nations allows dedicated air, ground, and naval units to fire conventional, chemical, and nuclear cruise missiles at military targets, amongst others.
The strategic use of ballistic and intercontinental missiles of varying size, and payload, is simulated in the game.
Terrain Modifiers
Terrain places specific demands on the men and machines in CON. A unit's stats are directly affected by the type of terrain it is currently positioned on. Toggle the Terrain Types overlay from the Settings & Info Panel to aid your planning.
The following unit attributes are affected by terrain. You can view the modifiers for each unit through the Unit Info Panel:
- Attack - A unit will be influenced either positively or negatively by this percentage when in this terrain while on attack.
- Defense - A unit will be influenced either positively or negatively by this percentage when in this terrain while in defensive actions.
- Speed Value - A unit will be modified by this percentage as it travels through the defined environment.
- Hit Points - a unit’s Hit Points will be modified depending upon terrain.
- Field of View - The sight range at which your unit can be visually detected varies by terrain. This is different from radar range, and is shown on the map as the brightest view around your unit
Entrenching
Placing a unit stack on a provincial center-point will provide a defensive entrenchment bonus while it remains there. This is automatic and stops once the unit is ordered to move on. The entrenchment bonus can be increased through the construction of certain buildings.
Retreating
You can order a unit that is engaged in combat to retreat to the nearest, friendly territory, at the cost of hit points. Only infantry and naval units can retreat.
Unit Healing
Building military hospitals will speed up the recovery time of units low on HP. Generally, ground units will recover a small amount of HP over the course of time when in friendly territory. Just as naval vessels repair over time when in shallow waters.
Hardened Bunkers
Protect your population against weapons of mass destruction through the construction of bunkers. The higher the bunker level, the more of a city's population will survive a serious attack.
Crimes Against Humanity
Units sent into enemy cities that are not yet conquered will start decimating the local population. This is considered a war crime and can have severe consequences with the morale of the player’s population – especially if large numbers of civilians suffer from this behavior.
Chemical and Nuclear Warfare
Probably the strongest weapons ever invented, these are the ultimate killers – albeit with a double edge. The resulting loss of life, devastation and contamination wrought by one of these weapons of mass destruction will not go unchecked by other nations and of the perpetrator’s own population. In Conflict of Nations there is the real chance of the world turning into a contaminated wasteland, populated by unhappy survivors. We warned you…
Insurgents
Insurgents are a special unit that pop out in a city as a rebellion mechanism. They are trained former military who are not easy pushovers because they are fighting for something they truly believe in, even if the “good guys” disagree, making them formidable and dangerous enemies. Even though they don't physically march into the city, they should be considered an attacking unit and treated as in the scenario "Offensive/ Defensive Engagement"- where the Insurgents are the Offensive unit.
Stealth Units
Stealthed units can have both meeting and offensive/defensive engagements, but on top of this, there is a First Strike / Ambush Bonus Damage.
Anti-Air vs Missiles
When you launch missiles against a target, we distinguish between two cases:
Point Defense
If the stack that your missile is attacking is/contains an anti-air unit, the combat tick is calculated as Point Defense. This means that the anti-air unit will defend itself every time against incoming missiles, i.e. there is no cool-down.
For example:
You fire two missile against an anti-air unit. It does not matter whether you fired your missiles one second or one hour apart, anti-air will defend against them every time.
AA Envelope
If the stack that your missile is attacking is a unit that is standing within anti-air range, but is not part of the same stack, the combat tick is calculated as AA Envelope. This means that the anti-air unit will go on cool-down before it can defend a close-by unit again.
For example:
You quickly fire two missile against an infantry unit that is standing within an anti-air unit's envelope that is standing close by. You fire another missile directly at the anti-air unit as well:
- The first missile, aimed at the infantry unit, is shot down by the anti-air unit.
- The second missile, however, lands a hit on the infantry unit since the anti-air unit's envelope is on cool-down.
- The third missile, directly aimed at the anti-air unit, is shot down since it is calculated as Point Defense.
Acts of War
Declaring War through the Diplomatic Panel
To declare war, click the Diplomacy button and select the target player. Then, from the drop-down menu, change your status from Peace to War. You could even be diplomatic about the process and send a note stating your justifications for doing so, but most commanders won’t be so kind.
Declaring War through Invasion
You declare war by default, when you trespass on the province of a nation with which you do not share a special diplomatic relationship. You will receive a pop-up warning whenever your move order would constitute an act of war.
If you want to move units through another nation's territory, you both must be members of the same coalition, or your diplomatic relation with that country needs to be one of the following:
Changes to Population Morale
When you declare war, it affects your nation as a whole. This war penalty affects all your provinces' morale, which slows down resource production as well as troop mobilization. You receive a penalty for every country you are at war with.
To see your war penalty, select one of your provinces, and click the i button beside the Morale indicator in the province bar. This will also show you what else affects morale in the selected province.
Combat Mechanics
When two armies are engaged, combat rounds are calculated every hour. We differentiate between four possible scenarios:
- Meeting engagements
- Attack/Defense engagements
- Edge cases
- Cases where two armies are in movement
Meeting Engagement
Scenario: Army A attacks army B in the open - where army B is stationed outside of the province's center-point.
First Combat Tick (immediately):
- Army A attacks army B using its offensive stats
- Army B defends against army A using its defensive stats
- Army B counter-attacks army A using its offensive stats
- Army A defends against army B using its defensive stats
Second Combat Tick (after 1 hour has passed):
- Army A attacks Army B using its offensive stats
- Army B defends against Army A using its defensive stats
- Army B counter-attacks Army A using its offensive stats
- Army A defends against Army B using its defensive stats
- and so on...
Attack/Defense Engagement
Scenario: Army A attacks army B - where B is stationed on the province's center-point.
When army B is entrenched on a province's center-point, it is not performing offensive actions. Only army A conducts attack rounds, while army B is just defending.
First Combat Tick in chronological order - first exchange between the two armies, happens immediately:
- Army A attacks army B using its offensive stats
- Army B defends against army A using its defensive stats
Subsequent Combat Ticks in chronological order - hourly after FCT:
- Army A attacks army B using its offensive stats
- Army B defends against army A using its defensive stats
- Army A attacks army B using its offensive stats
- and so on...
Edge Cases
When you give a unit the order to move, and it has to pass through a hostile unit, it will engage in combat before it continues onward to its final destination.
Cases Where Two Armies are in Movement
Army A and army B run across each other while moving on the map. If army A and army B are both moving without an attack order and are within combat range, they will engage.